| |
|
Gusseted Plastic Angle Bracket (pack of 8)
Here's a very lightweight 3/4" by 3/4" plastic gusseted angle bracket. We use these a lot in our various kits to mount things like servos to bases. Made of nearly unbreakable high density polyethylene, this bracket is mounted using #4 to #8 screws (not included). You can also drill out the hole if needed for 1/4"-20 fasteners.
Note the gusset that adds support and strength to this angle bracket. Though very lightweight -- just a few grams -- these are about as strong as steel brackets of the same size.
Sold in convenient packs of 8.
SKU Number:BRAC-GUS1
|
|
|
|
| |
|
Wide 2" Gusseted Plastic Angle Bracket (pack of 8)
Like our standard gusseted plastic angle brackets, but 2" wide, for those jobs where you need extra, extra stength. Four pre-drilled holes for #4 to #8 screws.
Comes in packs of 8.
SKU Number:BRAC-GUS2
|
|
|
|
| |
|
Slotted Groove Corner Bracket (pack of 8)
Plastic corner bracket with side gussets provide a 3/8" long slotted groove for mounting flexibility. The groove will accommodate up to #8 screws. Measures 5/8" wide, by 15/16" x 15/16". Made of lightweight but nearly unbreakable high density polyethylene.
Sold in packs of 8.
SKU Number:BRAC-SLOTTED
|
|
|
|
| |
|
Nylon Spacer Standoffs (pack of 8)
Nylon threaded hex standoffs are 9/16" long, and available with F-F threads. Threads are 4-40. (Sorry, the M-F thread standoffs shown in the picture are sold out, and no longer available.)
Does not include 4-40 hardware. See our 4-40- micro fasteners for 4-40 steel machine screws, in lengths from 3/8" to 1".
Sold in packs of 8 (eight).
SKU Number:RISER-NYL
|
|
|
|
| |
|
Risers, Set of Four
Aluminumm, nylon, or steel threaded risers, complete with steel or nylon machine screws. In sets of four (four risers, eight screws). Materials chosen for their strength and weight. Select from among several popular lengths.
1/2" Nylon
- 0.250" hex standoffs (4)
- 4-40 threads
- 4-40 x 1/2" steel screws (8)
- Total weight: 0.2 oz (6g)
5/8" Nylon
- 0.250" hex standoffs (4)
- 4-40 threads
- 4-40 x 1/2" steel screws (8)
- Total weight: 0.2 oz (6g)
3/4" Nylon
- 0.250" hex standoffs (4)
- 4-40 threads
- 4-40 x 1/2" steel screws (8)
- Total weight: 0.2 oz (6g)
7/8" Nylon
- 0.190" round standoffs (4)
- 4-40 threads
- 4-40 x 1/2" steel screws (8)
- Total weight: 0.3 oz (8g)
1" Steel (with nylon machine screws)
- 0.250" hex standoffs (4)
- 6-32 threads
- 6-32 x 1/2" screws (8)
- Total weight: 0.3 oz (8g)
SKU Number:RISER-SET
|
|
|
|
|
